Harvester 620s Pro

 

The largest and most equipped of our harvesters.

Kranman harvester 620S Pro has separate independent pump for drive, crane and head. The crane is heavily dimensioned and is 100% parallel, range 5.4 meters and lifting force 700 kg on a straight arm. To get the full potential of the crane, we have developed a weight-optimized and stable chassis, which does not require support legs.

Visibility and comfort in the cab are hard to beat. You can sit in the chair and look straight up at the treetops. Control of the machine, crane and unit is in the armrests, this means that you never have to reach. The servos levers make the movement of the unit between the trees very easy and accurate. This also reduces the risk of tribal damage.

The driving pedals are on the floor, one pedal for the front and one for the back. If you release the pedal, the handbrake and waist lock will run automatically. The parallel operation works twice as fast in and out compared to a normal crane. Since the engine is located at the other end of the machine and the cab is rubber suspended, the cab becomes silent.

Apart from the unit, the machine is built without computer controlled electronics. All so that you as a customer will get a reliable machine that can be stored and used in its proper environment, the forest. We build machines that are easy to drive, reliable and if anything should happen; easy to repair.

Equipment:

Click here to compare equipment

  • Diesel engine, 24 hp 4 cylinders
  • Wheel and diameter measurement on the unit
  • 12 LED lights
  • Servo levers in the armrests
  • Double-armed windscreen wipers
  • Water-borne heating in the cab
  • Automatic waist lock
  • Automatic brake
  • Indoor lighting
  • Extra sound attenuation in cab
  • Constant pressure pump for the unit
  • Tanmeter
  • Rear view camera
  • Radio with Bluetooth
  • Saw holder
  • Transport gear (10 km/h)
  • Rotary absorbers in rotator link
  • USB charging socket
  • Radio-controlled winch with 30 m wire
  • Crane tilt
  • Air-dampened chair
  • Heat in the chair
  • Crane dampers with accumelators
  • Diesel heater starting via mobile

Specification

Engine model Kubota 1505
Max work lap 2,300 rpm
Effect 24.8 hp
Torque 93Nm
Displacement 1.49 litres
Transmission Hydrostat
Braking system, front and rear Hydraulic lamella brakes
Electrical system, voltage 12 v
Battery 71 Ah
Generator 40 A
Lighting LED 3-12 pcs 15 W
Crane, length 5.4 m
Lifting force 5.4 m 700 kg
Max speed 10 km/h
Weight 4050 kg
Front wheels 400/16-15.5″
Rear wheels 400/55-22.5″
Fule tank 70 litres
Fuel consumption 3.5 l/h
Ground clearance 35 cm
Length 560 cm
Width 167 cm
Height 290 cm
Folding diameter Max 30 cm
Twig diameter 2-25 cm
Saw bar 14″
Saw chain 2 mm, .404

Esita avaldus!




    Vorm on kaitstud Google RECAPTCHA lahendusega: privaatsustingimused ja teenusetingimused.